edgecrusher
Member
Posts: 31
Primary Railroads: Monon, RI, NYC, PRR, C&EI, CNW, Milw......
|
Post by edgecrusher on Sept 8, 2015 10:06:41 GMT -5
|
|
|
Post by backshophoss on Sept 8, 2015 23:31:45 GMT -5
Nicely Done! Was that car used on a certain train or in "pool"service?
|
|
edgecrusher
Member
Posts: 31
Primary Railroads: Monon, RI, NYC, PRR, C&EI, CNW, Milw......
|
Post by edgecrusher on Sept 9, 2015 16:05:51 GMT -5
To be honest I'm not really sure. It'll be in pool service for my purposes.
|
|
|
|
Post by backshophoss on Oct 19, 2015 14:34:55 GMT -5
A nice job of weathering!
|
|
|
Post by slowfreight on Oct 19, 2015 19:36:27 GMT -5
I like the coloring on the wheels vs. the truck frames. It's really nice overall.
|
|
|
Post by acelaphillies on Oct 21, 2015 13:25:58 GMT -5
Nice work, I think you definitely got your desired look.
|
|
edgecrusher
Member
Posts: 31
Primary Railroads: Monon, RI, NYC, PRR, C&EI, CNW, Milw......
|
Post by edgecrusher on Nov 3, 2015 14:43:45 GMT -5
Thanks for the compliments guys. Here's one more of it with some of its P85 relatives in a more natural looking setting.
|
|
|
Post by antoniofp45 on Jan 10, 2016 10:19:11 GMT -5
Edgecrusher, That is a beautiful job! Quick question: where did you get the air hoses from? That is a detail that I very much want to install on all of my Walthers passenger cars but the hoses I have on hand are for freight stock. Was mounting difficult? Just a slight update, I finished up this car with some light weathering over the weekend. I was going for the well used but maintained look, I'm pretty happy with it.
|
|
edgecrusher
Member
Posts: 31
Primary Railroads: Monon, RI, NYC, PRR, C&EI, CNW, Milw......
|
Post by edgecrusher on Jan 13, 2016 11:18:34 GMT -5
Thanks Antonio. The hoses are a set from Cal Scale, P/N: 190-275. They include the steam, air & signal hoses. On my cars that are close coupled with diaphragms I tend to leave the steam line off and paint the coupler trip pin. The cars are nearly impossible to get apart without the trip pin. The set is a universal design, but fits the Walthers cars really well. Take a look at the pics I've attached and you'll see how I've mounted them. If you need a better look I can pop off the coupler plate and take another pic too. I also grabbed a pic of an unfinished express reefer that shows the full hose package.
|
|
|
Post by antoniofp45 on Jan 18, 2016 11:17:25 GMT -5
Edgecrusher, Excellent work! Will be very helpful in helping me detail my passenger cars. I'll order the hose sets from Bowser. Thanks so much for your info and the photos.
|
|